dsc_script Resource

Edit this page in the Chef repository

All Infra resources page

Windows PowerShell is a task-based command-line shell and scripting language developed by Microsoft. Windows PowerShell uses a document-oriented approach for managing Windows-based machines, similar to the approach that is used for managing Unix and Linux-based machines. Windows PowerShell is a tool-agnostic platform that supports using Chef for configuration management.

Desired State Configuration (DSC) is a feature of Windows PowerShell that provides a set of language extensions, cmdlets, and resources that can be used to declaratively configure software. DSC is similar to Chef, in that both tools are idempotent, take similar approaches to the concept of resources, describe the configuration of a system, and then take the steps required to do that configuration. The most important difference between Chef and DSC is that Chef uses Ruby and DSC is exposed as configuration data from within Windows PowerShell.

Many DSC resources are comparable to built-in Chef Infra resources. For example, both DSC and Chef have file, package, and service resources. The dsc_script resource is most useful for those DSC resources that do not have a direct comparison to a resource in Chef, such as the Archive resource, a custom DSC resource, an existing DSC script that performs an important task, and so on. Use the dsc_script resource to embed the code that defines a DSC configuration directly within a Chef Infra recipe.

Syntax

A dsc_script resource block embeds the code that defines a DSC configuration directly within a Chef recipe:

dsc_script 'get-dsc-resource-kit' do
  code <<-EOH
    Archive reskit
    {
      ensure = 'Present'
      path = "#{Chef::Config[:file_cache_path]}\\DSCResourceKit620082014.zip"
      destination = "#{ENV['PROGRAMW6432']}\\WindowsPowerShell\\Modules"
    }
  EOH
end

where:

• the remote_file resource is first used to download the DSCResourceKit620082014.zip file.

The full syntax for all of the properties that are available to the dsc_script resource is:

dsc_script 'name' do
  code                       String
  command                    String
  configuration_data         String
  configuration_data_script  String
  configuration_name         String
  cwd                        String
  environment                Hash
  flags                      Hash
  imports                    Array
  timeout                    Integer
  action                     Symbol # defaults to :run if not specified
end

where:

• dsc_script is the resource.
• name is the name given to the resource block.
• action identifies which steps Chef Infra Client will take to bring the node into the desired state.
• code, command, configuration_data, configuration_data_script, configuration_name, cwd, environment, flags, imports, and timeout are properties of this resource, with the Ruby type shown. See “Properties” section below for more information about all of the properties that may be used with this resource.

Actions

The dsc_script resource has the following actions:

:nothing

This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

:run

Default. Use to run the DSC configuration defined as defined in this resource.

Properties

The dsc_script resource has the following properties:

code

Ruby Type: String

The code for the DSC configuration script. This property may not be used in conjunction with the command property.

command

Ruby Type: String

The path to a valid Windows PowerShell data file that contains the DSC configuration script. This data file must be capable of running independently of Chef and must generate a valid DSC configuration. This property may not be used in conjunction with the code property.

configuration_data

Ruby Type: String

The configuration data for the DSC script. The configuration data must be a valid Windows PowerShell data file. This property may not be used in conjunction with the configuration_data_script property.

configuration_data_script

Ruby Type: String

The path to a valid Windows PowerShell data file that also contains a node called localhost. This property may not be used in conjunction with the configuration_data property.

configuration_name

Ruby Type: String

The name of a valid Windows PowerShell cmdlet. The name may only contain letter (a-z, A-Z), number (0-9), and underscore (_) characters and should start with a letter. The name may not be null or empty. This property may not be used in conjunction with the code property.

cwd

Ruby Type: String

The current working directory.

environment

Ruby Type: Hash

A Hash of environment variables in the form of ({‘ENV_VARIABLE’ => ‘VALUE’}). (These variables must exist for a command to be run successfully).

flags

Ruby Type: Hash

Pass parameters to the DSC script that is specified by the command property. Parameters are defined as key-value pairs, where the value of each key is the parameter to pass. This property may not be used in the same recipe as the code property. For example: flags ({ :EditorChoice => 'emacs', :EditorFlags => '--maximized' }).

imports

Ruby Type: Array

Warning

This property MUST be used with the code attribute.

Use to import DSC resources from a module.

To import all resources from a module, specify only the module name:

imports 'module_name'

To import specific resources, specify the module name, and then specify the name for each resource in that module to import:

imports 'module_name', 'resource_name_a', 'resource_name_b', ...

For example, to import all resources from a module named cRDPEnabled:

imports 'cRDPEnabled'

To import only the PSHOrg_cRDPEnabled resource:

imports 'cRDPEnabled', 'PSHOrg_cRDPEnabled'

timeout

Ruby Type: Integer

The amount of time (in seconds) a command is to wait before timing out.

ps_credential Helper

Use the ps_credential helper to embed a PSCredential object— a set of security credentials, such as a user name or password —within a script, which allows that script to be run using security credentials.

For example, assuming the CertificateID is configured in the local configuration manager, the SeaPower1@3 object is created and embedded within the seapower-user script:

dsc_script 'seapower-user' do
  code <<-EOH
    User AlbertAtom
    {
      UserName = 'AlbertAtom'
      Password = #{ps_credential('SeaPower1@3')}
    }
  EOH
  configuration_data <<-EOH
    @{
      AllNodes = @(
        @{
          NodeName = "localhost";
          CertificateID = 'A8D1234559F349F7EF19104678908F701D4167'
        }
      )
    }
  EOH
end

Common Resource Functionality

Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The delay in seconds between retry attempts.

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef Infra Client.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer

subscribes

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

• A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
• A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if

Prevent a resource from executing when the condition returns true.

only_if

Allow a resource to execute only if the condition returns true.

Examples

The following examples demonstrate various approaches for using the dsc_script resource in recipes:

Specify DSC code directly

DSC data can be specified directly in a recipe:

dsc_script 'emacs' do
  code <<-EOH
  Environment 'texteditor'
  {
    Name = 'EDITOR'
    Value = 'c:\\emacs\\bin\\emacs.exe'
  }
  EOH
end

Specify DSC code using a Windows PowerShell data file

Use the command property to specify the path to a Windows PowerShell data file. For example, the following Windows PowerShell script defines the DefaultEditor:

Configuration 'DefaultEditor'
{
  Environment 'texteditor'
    {
      Name = 'EDITOR'
      Value = 'c:\emacs\bin\emacs.exe'
    }
}

Use the following recipe to specify the location of that data file:

dsc_script 'DefaultEditor' do
  command 'c:\dsc_scripts\emacs.ps1'
end

Pass parameters to DSC configurations

If a DSC script contains configuration data that takes parameters, those parameters may be passed using the flags property. For example, the following Windows PowerShell script takes parameters for the EditorChoice and EditorFlags settings:

$choices = @{'emacs' = 'c:\emacs\bin\emacs';'vi' = 'c:\vim\vim.exe';'powershell' = 'powershell_ise.exe'}
  Configuration 'DefaultEditor'
    {
      [CmdletBinding()]
      param
        (
          $EditorChoice,
          $EditorFlags = ''
        )
      Environment 'TextEditor'
      {
        Name = 'EDITOR'
        Value =  "$($choices[$EditorChoice]) $EditorFlags"
      }
    }

Use the following recipe to set those parameters:

dsc_script 'DefaultEditor' do
  flags ({ :EditorChoice => 'emacs', :EditorFlags => '--maximized' })
  command 'c:\dsc_scripts\editors.ps1'
end

Use custom configuration data

Configuration data in DSC scripts may be customized from a recipe. For example, scripts are typically customized to set the behavior for Windows PowerShell credential data types. Configuration data may be specified in one of three ways:

• By using the configuration_data attribute
• By using the configuration_data_script attribute
• By specifying the path to a valid Windows PowerShell data file

The following example shows how to specify custom configuration data using the configuration_data property:

dsc_script 'BackupUser' do
  configuration_data <<-EOH
    @{
     AllNodes = @(
          @{
          NodeName = "localhost";
          PSDscAllowPlainTextPassword = $true
          })
     }
  EOH
  code <<-EOH
    $user = 'backup'
    $password = ConvertTo-SecureString -String "YourPass$(random)" -AsPlainText -Force
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $user, $password

   User $user
     {
       UserName = $user
       Password = $cred
       Description = 'Backup operator'
       Ensure = "Present"
       Disabled = $false
       PasswordNeverExpires = $true
       PasswordChangeRequired = $false
     }
   EOH
end

The following example shows how to specify custom configuration data using the configuration_name property. For example, the following Windows PowerShell script defines the vi configuration:

Configuration 'emacs'
  {
    Environment 'TextEditor'
    {
      Name = 'EDITOR'
      Value = 'c:\emacs\bin\emacs.exe'
    }
}

Configuration 'vi'
{
    Environment 'TextEditor'
    {
      Name = 'EDITOR'
      Value = 'c:\vim\bin\vim.exe'
    }
}

Use the following recipe to specify that configuration:

dsc_script 'EDITOR' do
  configuration_name 'vi'
  command 'C:\dsc_scripts\editors.ps1'
end

Using DSC with other Chef resources

The dsc_script resource can be used with other resources. The following example shows how to download a file using the remote_file resource, and then uncompress it using the DSC Archive resource:

remote_file "#{Chef::Config[:file_cache_path]}\\DSCResourceKit620082014.zip" do
  source 'http://gallery.technet.microsoft.com/DSC-Resource-Kit-All-c449312d/file/124481/1/DSC%20Resource%20Kit%20Wave%206%2008282014.zip'
end

dsc_script 'get-dsc-resource-kit' do
  code <<-EOH
    Archive reskit
    {
      ensure = 'Present'
      path = "#{Chef::Config[:file_cache_path]}\\DSCResourceKit620082014.zip"
      destination = "#{ENV['PROGRAMW6432']}\\WindowsPowerShell\\Modules"
    }
  EOH
end